DAC 100 is D to A converter. It is a non – oversampling, no upsampling design with multi – bit dac chips. The carefully designed power supply is with shunt regulators. I / V conversion is done by a specially designed, built in house, transformer. Τhe analog stage uses single-ended class A transformer coupled triodes with valve rectification and choke regulation .
The valves are the high mu, high transconductance, low noise SIEMENS NOS tubes.
There are two available inputs:
- SPDIF coaxial 75 Ω with next gen connector.
This input can be used with CDT – 100 or other high quality transports.
- One Neutric 5 – pin analog current input for use with CDT100.
When this input is used with CDT-100 the digital part of the dac is disabled and is powered off. Only the analog section is used. With CDT-100 we strongly recommend the use of this input for optimum performance.
By using this 5-pin connector the signal is transferred to the analogue section of the DAC-100 at an absolute optimum sonic capacity avoiding possible limitations of digital interfacing.
All transformers are designed and built in house using the best available materials and are wound with sophisticated techniques for a totally transparent sound.
The transformers are of enormous size in order to achieve the absolute performance they seek.
The DAC-100 D/A converter is also 24bit/192Khz capable used in high resolution digital sources.
19,000.00€ VAT included
Thank you, we will contact you as soon as we receive your order.
Digital inputs: SPDIF(75 ohm) RCA
Analogue current input: YPSILON 5 Pin Connector
- RCA unbalanced
- XLR unbalanced(pin1,3grounded)
Resolution: 24 bit(multi bit converter) 192khz, maximum sampling rate
Nominal output: 2,8V rms
Power consumption: Typically 40 W
|Dimensions||400 × 400 × 180 mm|
DAC 1000 SE
34,000.00€ VAT included
DAC 100 SE
30,000.00€ VAT included
20,000.00€ VAT included
16,500.00€ VAT included
14,000.00€ VAT included